- Linfloor Raised Floor System
- >
- Linfloor - AD 28 Pedestal Adhesive
Linfloor - AD 28 Pedestal Adhesive
Feature and Benefits
l Solvent and isocyanate free, 100% solids
l Non-silicone
l Extremely low shrinkage
l Fast curing – typically 7-14 days
l Permanently elastic in a broad temperature
l Low odor
l Primer-less adhesion to most surfaces
l Non-flammable
Description:
AD-28 was designed as a one-component multi-purpose adhesive for interior applications or applications not subject to UV light. AD-28 is used
extensively for pedestal attachment (galvanized steel to concrete) in the Access Flooring system. This high-performance adhesive provides superior
adhesion and flexibility for seismic zones. Load calculations using AD-28 may provide one or all of the following cost saving options; the ability to use
smaller pedestal bases, avoid the use of mechanical fasteners, the application of less adhesive.
Packing:
l Portable Pack: 4Litre per 1 set
l Industrial Pack: 20Litre per 1 set
Physical Properties
Approximate Performance Properties
Basic Material:
Proprietary Polymer After 7 days ambient cure
Consistency: Paste
Shear Strength: 200 psi
Color: Natural
Tensile Strength: 160 psi
VOC’s: 17g/L
Elongation at Break: 175%
Type: Elastomeric
Hardness Shore A45
Solvent: 0%
Slump (Sag) Zero Slump
Isocyanate: 0%
Flame Spread/Smoke: 0 Flame/ 0 Smoke
Specific Gravity: 1.6
Stain Testing: No staining
Shelf Life: 0 months in unopened containers stored between 60ºFand 80º F.
Low Temperature Flex -20ºF
Packing: 4 Liter & 20 Liter
Service Temperature: -40ºF to 200º F, temporarily resistant to 390ºF